If you're looking to maximize your speed and efficiency on the road, installing aero bars on your bike is a great solution. Aero bars can significantly reduce wind resistance, allowing you to achieve faster speeds with less effort. Here's a step-by-step guide to installing road bike aero bars, using the Trifox Aero Aerofoil Section Carbon Drop Handlebar TC20AF.
1. Gather Your Tools and Materials
Before you begin, ensure you have all necessary tools and materials:
Aero bars (like the Trifox TC20AF)
Hex keys
Torque wrench
Handlebar tape
Scissors or a knife
2. Prepare Your Handlebar
First, remove any existing handlebar tape from your current handlebars. This will give you a clean surface to work with and prevent any obstruction during installation. Make sure to clean the handlebar thoroughly to remove any residue or debris.
3. Position the Aero Bars
Next, place the aero bars on the handlebar in the desired position. Typically, they should be placed centrally on the top section of the handlebar. Ensure they are symmetrical and aligned correctly. Adjust the angle to a comfortable position that allows you to maintain an aerodynamic posture.
4. Secure the Aero Bars
Using the hex keys, tighten the bolts to secure the aero bars in place. It's crucial to follow the manufacturer's torque specifications to avoid over-tightening, which can damage the carbon handlebar. If you don't have the specifics, generally, a torque setting of 5-6 Nm is recommended for carbon components.
5. Adjust the Armrests and Extensions
Most aero bars come with adjustable armrests and extensions. Set the armrests at a width and height that provides comfort and support for your forearms. Adjust the extensions so that your hands can reach the shifters and brakes comfortably while maintaining an aerodynamic position.
6. Rewrap the Handlebar Tape
Once the aero bars are securely installed and adjusted, rewrap the handlebar tape. Start from the ends of the handlebar and work your way up, ensuring the tape is tight and evenly wrapped. Cut off any excess tape and secure the ends with finishing tape.
7. Test Ride and Final Adjustments
Take your bike for a test ride to ensure everything feels comfortable and secure. Pay attention to how the aero bars handle and make any minor adjustments as needed. It may take a few rides to fine-tune the setup for maximum comfort and efficiency.
Installing aero bars, such as the Trifox Aero Aerofoil Section Carbon Drop Handlebar TC20AF, can greatly enhance your cycling performance by reducing aerodynamic drag. Follow these steps to achieve a secure and comfortable installation, and enjoy the benefits of improved speed and efficiency on your next ride.
![](https://img.trifoxbike.com/images/news/facebook.png)
![](https://img.trifoxbike.com/images/news/instagram.png)
![](https://img.trifoxbike.com/images/news/twitter.png)
![](https://img.trifoxbike.com/images/news/pinterest.png)
![](https://img.trifoxbike.com/images/news/blogger.png)
![](https://img.trifoxbike.com/images/news/leftPre.png)
![](https://img.trifoxbike.com/images/news/rightNext.png)