Among the three largest consumables of bicycles (chains, tires, brake pads), Relatively speaking, brake pads are relatively low in consumption and replacement frequency. Compared with chains, tires, and other accessories that are easy to lose money, hardly notice it. After all, the frequency of replacement is not high and the size is small. You can find the problem only if you watch closely. But in my opinion, the brake pads not only play an important role in safety protection but also a window that shows the low-key luxury taste and cycling values. Well, let's find out, there are some particularities in the choice of brake pads.

Love and hate between brake pads and rims

We know that when the brake pads directly contact and act on the rim, physical reactions such as braking, heat generation, and wear will occur. In addition to the primary function and consideration of braking force, we should also consider whether the material of the brake pad and the rim can be perfectly matched.In addition to the heat generation that bike friends are most concerned about, the "frame burning" is caused by friction and heat, and the temperature is too high; the second is wear. Under the action of friction between the brake shoes and the rim, both sides will cause a certain degree of wear. The material, the brake method, and the friction time will affect the degree of wear.

The brake pads used in metal rims are rated at 180 degrees Celsius, while the brake pads used in carbon fiber rims are rated at 320 degrees Celsius. Therefore, the brake pad materials for carbon rings, aluminum rings, and ceramic rings are different. Brake pads are not just a piece of brake pads, and you need to change them when you use them up, but make a reasonable choice based on the material of the rim.

Material

The material of bicycle brake pads is mainly composite rubber and cork. At present, the mainstream brake pads on the market use composite rubber. Due to the requirements of different material rims, the synthetic composition is different, which is better in terms of temperature and wear. Ground protection of the rim. Cork brake pads appear earlier and are extremely difficult to wear. They perform better in temperature control and in humid environments, but generally speaking, the braking force is relatively weak.

Recommend