Bicycles have been a popular mode of transportation for a long time now, and their parts have been evolving too. Although quick release axles have become the norm, some riders still prefer bolt-on axles due to their strength and security. If you are one of those riders who would like to convert your bike hub to bolt-on axles, then you have come to the right place.In this post, we will discuss How to convert a hub to bolt-on axles

Step 1: Remove the quick-release axle

The first step in converting your bike hub to bolt-on axles is to remove the quick-release axle. Start by opening the quick release lever and unscrewing the axle counter-clockwise. Hold the nut on the opposite side with a thin wrench to prevent the axle from turning. Once the axle comes out, remove the bearings and keep them aside.

Step 2: Remove the washers and cones

Next, remove the washers and cones from the hub. You may need to use a cone wrench to loosen the cones. Keep the washers and cones aside.

Step 3: Insert the bolt-on axles

Insert the bolt-on axles into the hub and tighten them with a cone wrench. Make sure the axles are tightened evenly on both sides, so the wheel runs straight. Place one washer and cone on each axle, followed by the bearings. Push the axle through the hub and secure the other set of cone and washer.

Step 4: Check the wheel alignment

Check the wheel alignment by placing it on a flat surface. If the wheel wobbles or tilts to a side, you may need to adjust the cones. Loosen the axle nut on the opposite side and tighten the other side slightly until the wheel runs straight. Repeat until the wheel is perfectly aligned.

Step 5: Secure the bolt-on axles

Once the wheel is aligned, secure the bolt-on axles by tightening the nuts on both sides with a wrench. Make sure the nuts are tightened evenly, not too tight or too loose. You can also use a torque wrench to ensure the right amount of tightness.



Conclusion:

There you have it, the ultimate guide to How to convert a hub to bolt-on axles. It might seem daunting at first, but with some patience and the right tools, it's actually pretty easy. By converting to bolt-on axles, you'll have a more secure and sturdy ride. Just remember that safety is always the top priority when working on your bike, so don't hesitate to seek professional help if needed. Happy biking!